Affordable Locksmith OKC | (405) 367-3484 | Locksmith OKC OK
Common Key Fob Problems You Should Know About
Having a car key fob handy is not only convenient but it is essential as it locks and unlocks your vehicle’s door and trunk. But what if all of a sudden your car fob malfunctions, and especially when you are in a hurry? Whether it is due to the battery failure or there is some other technical problem in your key fob, chances are your vehicle’s door would not open with your remote key fob and that too at the most inconvenient location. While most of the time, it is your dead key fob battery which results in the malfunctioning of your keyless entry remote, there can be some other reasons as well. Fret not! Hire reliable key fob replacement in OKC services.
Here we have listed the common key fob problems that you may experience at some point. Let’s have a look:
Check the Battery of Your Keyless Entry Remote
Most of the car keys comprise 4 button cell batteries that are usually cheaper and of low-quality. Regardless of the type of battery affixed in your key fob, you should open the fob to check whether or not your battery is working. Replacing your dead battery is not a challenging task. All that you need to do is determine the type of battery your key fob uses, hit the nearest hardware store, get a fresh battery, and put it in the place of the older one. Basically, your car key fob would run on CR2032 or CR2025 battery, however, you could also find CR1632 and CR1620 batteries used in some models. Now the good news is the new battery is not that expensive and could easily be fixed following the manufacturer’s instructions.
Once you have replaced the key, check if the remote is working. If still it doesn’t lock and unlock your car, there might be some issue with the remote such as broken battery contacts or malfunctioning of the fob buttons.
Broken Internal Contacts in your Keyless Entry Remote
Key fobs are more likely to get damaged by physical abuse as they aren’t robust enough to resist the frequent falls. Usually, if you improperly handle your car key fobs constantly, you might either end up breaking its buttons or damaging its battery. Either way, you won’t be able to use the ruined key fob again. In order to examine the issue with the key fob remote, open it and conduct a visual inspection. Go through all the parts and see if there is any damage to the battery or other internal parts.
If your battery connector terminals are damaged, you will need to replace the battery (follow the first step). If not battery connector terminals, you might have broken the buttons. You could easily spot the button problems by visually inspecting the device. If any of the buttons do not pop out properly or if they look loose, you will either have to get a new key fob set or hit a local hardware store to fix the buttons.
Get the most of reliable key fob replacement in OKC services.